Added new subsection .04 in its entirety. Remainder of section unchanged.
Replace current section in its entirety to include new requirements of general design and installation.
Add a new document describing the sequences of operation necessary to accomplish the HVAC functions of the Enterprise Utility Management System (EUMS).
Updated temperature control sequence description and explanatory text
Update air handler requirements regarding efficiency, system reliability, redundancy, identification, fan arrangement considerations, proper mixing, bearings, dampers, and referencing the sequence of operations.
Modify minimum face velocity and component requirements of hoods in radioisotope laboratories.
Upload new specifications document to standards.
Add new section 01 35 13
Upload new HMC Design Standards documents
Update to window and glazing standards.
Update dumpster location requirements and compactor requirements.
Update requirements of flexible pump couplings for Base Mounted End Suction Pumps and Base Mounted Double Suction Pumps.
Upload HMC Infection Control Policy at .02C
Revise thermometer and gauge requirements in HVAC systems.
Update of several sections within Division 26, including labeling, lift equipment requirements, lighting controls, generators, transfer switches, surge suppression, commissioning and emergency lighting.
Upload new guide Sequence of Operation for Air Terminal Units - Single Duct Variable Air Volume with Hot Water Reheat & Perimeter Heating
Revise Division 01 to provide a dedicated section (01 25 30) for safety requirements; add new fall protection requirements.
Replace June 2009 version of the following embedded document: Remainder of section is unchanged.
Add outdoor air intake protection requirements
update requirements for water closets, urinals, and floor drains.
Upload new guide Sequence of Operations for Enterprise Utility Management System (EUMS) Equipment Control Strategies
Update to further describe sustainable design objectives, and to adopt ASHRAE Standard 189.1 as high performance "Green" Standard for the University.
Coordinate with section 01 81 13, expand general HVAC design and coordination requirements, and general reorganization.
Revise guidance and description of VFD specification, update guide specification with new document.
Revise AHU Sequence of Operation and add supporting diagrams.
Update sections with added content and document clarification.
Update Building Audtomation Systems (BAS) Guide Spec
Add new section to replace outdated references in 23 82 00 .04
Add more detailed general, materials, and installations requirements for pressed joint system.
Additions to current section to include cross references.
Uploading new documents to the section, and fixing one misspelling.
Criteria for Belimo PICCV valve selection developed by Steve Oskin
Modify Sections 01 01 00 subsection .01 and 23 05 01 subsection .05 per the following (deletions are shown struck through and additions are double underlined). Remainders of sections are unchanged.
Revisions to Section 23 22 00 completed 7/22/2011
Revision to 23 21 13.03 A, Hydronic Specialties
Update to 25 90 00 EUMS Document rev3
Update paint manufacturers.
Update requirements document to match current University expectations for Design Review Deliverables.
Modify subsection .03, a.5 in Section 23 21 23. Remainder of section is unchanged.
Addition of section 23 21 00.02, Flow Balance and Differential Pressure Control
Energy Recovery and Air Handling Units.
Replace obsolete Mechanical Color Code painting 1. Follow current industry ANSI/ASME A13.1 Standard for color coding scheme and piping system identification. Comply with standard for lettering size, color scheme based on classification of contents, length of color field, locations and intervals, and visibility. http://www.bradyid.com/downloads/SMD_296.pdf?msgkey=downloadsDetail.pleaseWait.msg Also move mechancial room general painting requirements to Div 9. Also edit similarly if referenced in Div 21 and 22.
Remove old uploaded document and replace with new version. Add 3 additional uploaded document.
Modify Secion 23 05 01_02 and Section 23 21 13_03 to delete conflicts and add cross references to other updated sections related to balancing valves in general and at pumps.
Replace current section in its entirety to follow common industry practice and to expand section into three parts.
Update 335000.01 to include 49 CFR Part 192 regulatory requirements for all PSU properties
Post Revised specifications from ACES
Addition of section 12 40 00
Additions to section 23 21 13
Modify current section to include requirements for card readers.
Modify current section to replace linked document with updated document.
Replaced Building Automation Systems document.
Modify subsection .03.A.6 of Section 23 21 23. Remainder of section is unchanged.
Section 23 73 00, part .02, items B and F were modified. Remainder of section is unchanged.
Section was revised to reflect changes to hiring of testing agencies
Section was added to reference new "Sructural Backfill and Compaction" Specification.
Added specification to address expansive aggregate
Subsection .02 B - revised requirements on combination shut-off balance valves.
Modified various sections in Division 26
Insert Document Table with new text and update the associated word document "OPP VFD Guidespec"
Modified heading of Part .01 and replaced text under subpart A
Replaced subsection .03 with new text, taking out the old table.
Replaced link to revised document "Building Automation Systems (BAS)"
Added Section 09 60 00 to Division 09.
Removed existing subsection .01 and replaced with new text. Added new text in subsections .03, .04, .05, and .06. Subsection .02 unchanged.
Added Subsection .04 to Section 23 22 00
Added a link to 23 21 00 Hydronic Piping and Pumps in subsection .02 B
Deleted subsection .01 and .02 and replaced with new .01 to .04 in their entirety. Relocate text from existing subsection .03 to new .05 and delete remaining existing subsections.
Replaced documents with updated details and sequences
Added subheading .01 in 26 50 00. Reworded .01 and .02, and added subheading .08 in 26 51 11. Remainder of section is unchanged.
Added additional paragraph in .01 General (26 52 00 Emergency Lighting)
Added paragraph to .01 Underground Ducts and Raceways for Electrical Systems
Modified .10 Scope to add new paragraph "h" under Support Circuitry.
Added clarification regarding acceptance of red LED exit signs.
Updated requirements for occupancy sensor controls.
Added new test related to pole manufacturers and sensor control of luminaires
Updated Section 26 22 00
Replaced Section 23 34 00 in it's entirety.
Added new subsection "01 78 46 Attic Stock" under section 01 70 00
Updated the table with a new document
Added new text to 23 41 00
added specific requirements for thermally broken frames and edge spacers
Added new subsection .12 in its entirety in Section 23 00 10.
Deleted the current section and replaced it in its entirety
Added new subsection .12 in its entirety in Section 23 00 10
Modified subsection .01, paragraph 5 in section 23 00 01. Remainder of section is unchanged.
Modified subsection .01 in Section 23 31 00. Remainder of section is unchanged.
Modify subsection .02.A.4 in Section 23 05 01. Remainder of section is unchanged.
Reworded subsection .01 General in Section 26 05 26 to include 2-hold lug requirement.
Modified section 09 68 10
Modified section 01 41 00 to include Environmental Compliance Checklist
Deleted some text in subsection .01 of Section 22 11 00
Updated the EUMS document
Modified subsection .01 - Lighting Design
Deleted subsection .05 Hydronic Specialties. Added section 23 21 16 in its entirety.
Updated Environmental regulatory Compliance Checklist and Addendum documents
Replaced the document for "Air terminal Units - Single Duct Variable Air Volume with Hot Water Reheat & Permiter Heating"
Replaced updated Building Automation Systems (BAS) document